Tap Repair & Replacement in Newcastle upon Tyne

Vetted & insured engineers Clear pricing before work starts G3-qualified for unvented cylinders No gas work — plumbing only

Modern taps rarely fail at the washer — most Newcastle upon Tyne homes now have ceramic cartridge taps, and it's the cartridge that wears. We carry the common sizes, so the fix is same-visit.

Newcastle upon Tyne water notes: Newcastle's supply from Kielder-backed sources is soft, keeping limescale low — the workload here is weighted toward winter freezes, ageing terrace pipework and Tyneside flat conversions. The Tyneside flat — two stacked flats behind paired front doors — is Newcastle's signature stock from Heaton to Fenham, and its shared walls and stacked services shape how leaks travel and how access works. Mains supply here is managed by Northumbrian Water.

Repairs: washers, cartridges and seals

Traditional compression taps drip because the washer or seat has worn — a re-washer and reseat is a fast, cheap repair. Ceramic disc taps (most modern mixers and quarter-turn taps) drip because the cartridge has worn or scaled; we carry common cartridge sizes and match obscure ones by manufacturer. O-rings cure leaks from the spout base and handles. In Newcastle upon Tyne's water, scale accelerates all of this — which also means a serviced tap lasts visibly longer than a neglected one.

Replacement done properly

When we replace a tap in Newcastle upon Tyne, isolation valves go in as standard if there are none — future repairs then take minutes and no draining down. Old flexis are replaced rather than reused, back-nuts get proper tools rather than swearing, and monoblocs are stabilised with the correct fixing kit so the tap doesn't work loose in a month. You can supply your own tap or choose from ranges we stock.

The real cost of a drip

One drip per second is roughly 5,500 litres a year — on a metered Newcastle upon Tyne supply, that's paid for twice, as water and as sewerage. Hot taps are worse: every drip carries heating cost too. A £69 repair typically pays for itself within months on a metered hot tap, before counting the staining and scale damage to the sink below.

Tap work pricing in Newcastle upon Tyne

From £69 for standard tap repairs in Newcastle upon Tyne, parts included. Replacements are quoted as labour plus tap, so you can compare our supplied ranges with your own purchase like-for-like. If your existing tap is obsolete and a repair means hunting discontinued cartridges, we'll tell you the honest economics up front.

Frequently asked questions

Do you fix outside taps?

Yes — repairs, replacements and new outside tap installations with the legally required double-check valve for backflow prevention, plus an internal isolation point so you can drain it each winter.

Can you fit a tap I bought online?

Yes — supply-your-own is fine and priced at the same labour rate. We'll check compatibility (tail lengths, hole spacing, pressure requirements) before removing the old tap, so a mismatch is caught before the sink is out of action.

Why does my tap still drip after a new washer?

Either the tap seat is scored (needs reseating or a seat insert), or the tap is actually a ceramic cartridge type where washers aren't the wear part. Persistent drips after DIY usually mean the wrong diagnosis, not a bad washer.

Can you match a cartridge for an unbranded tap?

Usually — cartridges follow common sizes (25mm, 35mm, 40mm) and spline patterns, and we measure and match. Genuinely obsolete taps do exist, and we'll tell you when replacement is the economic answer.