Tap Repair & Replacement in Leeds

Vetted & insured engineers Clear pricing before work starts G3-qualified for unvented cylinders No gas work — plumbing only

From period pillar taps in Kirkstall to monobloc mixers in Garforth kitchens, we repair and replace taps across Leeds, and we'll tell you honestly when a repair beats a replacement.

Leeds water notes: Leeds sits in a predominantly soft-water area supplied by Yorkshire Water's Pennine reservoirs, so heavy limescale is uncommon — corrosion and age, rather than scale, drive most pipework failures. Leeds is famous for its back-to-back and through terraces in Harehills, Beeston and Armley, alongside sprawling suburban semis and a fast-grown city-centre flat stock — three very different plumbing archetypes in one city. Mains supply here is managed by Yorkshire Water.

Repairs: washers, cartridges and seals

Diagnosis by symptom: a steady drip from the spout is a washer (compression taps) or cartridge (ceramic disc); leakage around the base of a swivel spout is O-rings; a handle that turns without resistance is a stripped head or spline; banging pipes when the tap closes is water hammer, cured with an arrestor or pressure adjustment rather than a new tap. Each is a stocked-part fix for our Leeds engineers. Leeds sits in a predominantly soft-water area supplied by Yorkshire Water's Pennine reservoirs, so heavy limescale is uncommon — corrosion and age, rather than scale, drive most pipework failures.

Replacement done properly

A professional tap replacement includes the parts that fail next: new flexible connectors (the old ones are the most common future flood source), service/isolation valves fitted if absent, thread sealing done correctly, and the tap tightened against a supported base rather than a flexing sink. It's the difference between a tap swap and a tap swap you won't revisit. We supply-and-fit or fit your purchased tap across Leeds at the same labour rate.

The real cost of a drip

That background drip is a running bill: thousands of litres a year, doubled in cost on a meter (supply plus sewerage), tripled in annoyance. Hot-side drips also drain your cylinder's heat. In Leeds's water the drip also leaves scale tracks that etch chrome and stain ceramics — cosmetic damage that outlasts the fault.

Tap work pricing in Leeds

Repairs from £65 including standard parts; replacement labour is a fixed band with the tap itself either supplied by you or itemised by us. Awkward access — seized fittings, no isolation, corroded traps in the way — is flagged before work continues, never billed as a surprise. All Leeds pricing is confirmed before the engineer starts.

Frequently asked questions

Do you fix outside taps?

Yes — repairs, replacements and new outside tap installations with the legally required double-check valve for backflow prevention, plus an internal isolation point so you can drain it each winter.

My mixer tap has low pressure on hot only — why?

Common on combi and gravity systems: scale or a blocked hot-side inlet filter, a kinked or degraded flexi, or the tap's internal flow restrictor. It's diagnosable in minutes with the tap head off.

Is a constantly dripping tap really worth fixing?

On a metered supply, unambiguously: thousands of litres a year, charged as both water and sewerage, plus heating cost on hot taps. The repair usually costs less than the annual waste.

Can you fit a tap I bought online?

Yes — supply-your-own is fine and priced at the same labour rate. We'll check compatibility (tail lengths, hole spacing, pressure requirements) before removing the old tap, so a mismatch is caught before the sink is out of action.